​

The device is a fast industrial spectrophotometer for sun lens and sunglasses including transmittance properties (signal light, UV, blue block…etc), and color difference. Reading tinting lens, gradient lens, photochromic lens, polarized lens, sunglasses according to standard requirements.

The device is used to automatically test the lens quality by using haze method.

The device is used to automatically test photochromic lens including spectrophotometer and activation lamp. The most precise reading in the world.

The device is used to test the resistance to fogging of lens, and fog-cam (brand new technology) to test the complete eyewear including safety eyewear, sunglasses, ski-goggle, helmet..etc.

The device is used for testing the refractive and astigmatic powers by using telescope method. Brand new technology testing method adopts camera to reduce result difference, and reflective system to reduce using space.

The device is used for tracing the dimension of the frame size. A, B, C, DBL, ED, EDA, LD, LDA…etc.

The device is used to test the resistance to impact of the lens and eyewear up to 100m/s. It is vertical design to save using space.

The device is used to automatically determine the axis of polarization on polarizing single lens & finished sunglasses by using head-form.

The device is used to automatically determine the axis of polarization on sunglasses, with headform and pantoscopic adjustment.

The device is used to manually determine the axis of polarization on sunglasses with pantoscopic adjustment.

The device is to test the resistance to solar radiation of lens

The device is used for protection against large dust particles.

The device is used for testing protection against molten metals

The device is used to test the lens surface damage by fine particles

The device is used to check the lens quality by using diffusion method B.

The device is to test the lens/Frame robustness by the drop ball

The device is manually drop ball test device, equipped with headform to test sunglasses and ski goggles.

The device is used for automatic and contemporaneous measurement of optical refractive properties.

The device is used to activate photocromic lenses.

The device is a simple photometer that measures the transmittance of lens at 400nm (UV), visible range, 950nm (Infrared Light).

The device is to test the resistance to deformation of the bridge frame

The device is used to test the minimum robustness of filters

The device is used to test the resistance to abrasion by using steel wool.

The device is used to test the lens surface damage by sands

The device is a stress tester for thermally tempered glasses.

The device is used for manual drop ball test on filters.

Standard head-form for Non-Impact use designed according to ISO18526-4

To check the reflection properties according to ISO 12312-1 and the Color Differences.

CVP50 is a machine for bending polycarbonate helmet visors.

​

The device is used for automatic and contemporaneous measurement of optical refractive properties. Only 3 seconds, it performs and finishes the test of optical refractive properties (Prismatic /Spherical /Astigmatic Power) for sunglasses, protection devices, ski goggle and safety glasses.

The device is used to test the uniformity transmittance of the sunglasses byusing 9 points method.

The device is used to test the resistance to fogging

The device is used to check the frame color by using objective way that is digitization L*a*b* color space system.

The device is used to check the lens quality by using diffusion method A with modified design.

The device is used to test the lens quality by using telescope method. This device can also test the spherical and astigmatic power according to ANSI Z87.1 requirement.

The device is used to test the resistance to impact of the lens and eyewear up to 200m/s.

The device is used to automatically determine the axis of polarization on sunglasses.

The device is used to manually determine the axis of polarization on sunglasses, equipped with headform and with pantoscopic adjustment.

The device is used to manually determine the axis of polarization on uncut lenses before cutting process.

The device is used to expose sunglass lens samples to irradiation to determine their resistance to fading.

The device is used for testing protection against large dust particles

The device is used for testing field of vision

The device is used to check the lens quality by using diffusion method A.

The unit is automatically to check the shape of the lens.

The device is used for manual drop high mass and penetration test on filters.

The device is used to test the prismatic power by laser system.

The device is used for visual inspection of lenses.

The device is used for visual inspection of lens surface.

The device is to test the multiple folding resistance of the glasses frame

The device is to test the resistance to to ignition

The device is used for testing static deformation, by applying a 100N mass on the lens sample.

The device is a stress tester for thermally tempered glasses.

The device is used to test the lens surface damage by eraser

The device is used for visual inspection of color and lens surface.

The device is used for automatic drop ball test on filters with balls reserve (max 50 balls, 16 mm).

Standard head-form for Impact use designed according to ISO18526-4

The device is a Spectrophotometer for Transmittance & Color Check and is IDEAL for Quality Control of Colored Glass, Plastic Film & other Translucent Materials in any industrial and labs environment.

P10 automatic bending machine can fit different kinds of molds for bending single lenses, recommended for small productions.