搜索

Resistance to Fogging

,

Wide Angle Scatter Light

,

Easy_Tester_Pro Combo

,

Photochromic Lens Test

Model:

鏡片防霧性能測試儀 (連鏡頭版)

Model:

12SBAPL1107/S+C
Anti-Fog + Cam (Double System)

設備用於測試抗霧性, 模擬真實環境影響

The device is used to test the resistance to fogging of lens, and fog-cam (brand new technology) to test the complete eyewear including safety eyewear, sunglasses, ski-goggle, helmet..etc.

變色鏡片測試

Model:

GET.Photochromic

設備用於自動測試光致變色鏡片，包括分光光度計和啟動變色光源。

The device is used to automatically test photochromic lens including spectrophotometer and activation lamp. The most precise reading in the world.

高速光譜儀

Model:

Smart_Color_Pro

設備用於測定鏡片或眼鏡成品的光透射率及光譜分析，和顏色分析

The device is a fast industrial spectrophotometer for sun lens and sunglasses including transmittance properties (signal light, UV, blue block…etc), and color difference. Reading tinting lens, gradient lens, photochromic lens, polarized lens, sunglasses according to standard requirements.

透光率一致性

Model:

Easy_Tester_Pro Combo

設備用於通過9點法測試太陽鏡的均勻透射率。

The device is used to test the uniformity transmittance of the sunglasses byusing 9 points method.

倔亮度及散光度測試

Model:

Digial Optitester

設備用於光學折射特性的自動和同時測量。

The device is used for automatic and contemporaneous measurement of optical refractive properties. Only 3 seconds, it performs and finishes the test of optical refractive properties (Prismatic /Spherical /Astigmatic Power) for sunglasses, protection devices, ski goggle and safety glasses.

工業分光光度計

Model:

Easy_Color

設備用於通過客觀的方式（即數字化L * a * b *色彩空間系統）檢查框架顏色。

The device is used to check the frame color by using objective way that is digitization L*a*b* color space system.

落球測試

Model:

GET.Impact

設備使用符合標準要求的球體測試鏡片的硬度

The device is to test the lens/Frame robustness by the drop ball

耐用性方案~硬性

Model:

7SBHPG1200/VERT/100
High Speed Cannon Test Equipment (Vertical Version)

設備用於測試高達100m / s的鏡片和眼鏡的耐衝擊性。

The device is used to test the resistance to impact of the lens and eyewear up to 100m/s. It is vertical design to save using space.

ISO18526-4人頭模 (撞擊測試用)

Model:

ISO 18526-4 Headform (Impact)

根據ISO18526-4設計的撞擊測試用標準頭模

Standard head-form for Impact use designed according to ISO18526-4

落砂測試

Model:

12SBSSE1064/C
Sand Spray Tester

設備用於測試細顆粒對鏡片表面的損壞

The device is used to test the lens surface damage by fine particles

擴散光測試

Model:

12SB1192BLDM1060/C PLUS/HP
Light Diffusion (Modified Method A) High Power Version

設備用於通過擴散法A檢查鏡片質量

The device is used to check the lens quality by using diffusion method A with modified design.

PA5偏光軸測試儀

Model:

LEMA PA5 Polarized Axis Tester

設備用於手動確定太陽鏡的偏振軸，該太陽鏡配有頭模和全景調節功能。

The device is used to manually determine the axis of polarization on sunglasses, equipped with headform and with pantoscopic adjustment.

PA2偏光軸測試儀

Model:

LEMA PA2 Polarized Axis Tester

設備用於在切割之前手動確定未切割鏡片的偏振軸。

The device is used to manually determine the axis of polarization on uncut lenses before cutting process.

粉塵防護性能測試

Model:

12SBCPR 1106
Large Dust Particles Test Equipment

設備用於防止氣體和細小的灰塵顆粒。

The device is used for protection against large dust particles.

線性研磨機

Model:

Linear Abraser 5750

設備用於測試橡皮對鏡片表面的損壞

The device is used to test the lens surface damage by eraser

擴散光測試 (Method A)

Model:

12SBLDM1060/A PLUS
Light Diffusion (Basic Method / Method A)

設備通過擴散方法A檢查鏡片質量。

The device is used to check the lens quality by using diffusion method A.

落球測試(DB2)

Model:

LEMA DB2 Drop Ball Test

設備通過擴散方法C檢查鏡片質量。

The device is used for automatic drop ball test on filters with balls reserve (max 50 balls, 16 mm).

落球測試(DB4)

Model:

LEMA DB4 Drop Ball Test

設備是手動落球測試設備，配備可測試太陽鏡和滑雪鏡的頭模。

The device is manually drop ball test device, equipped with headform to test sunglasses and ski goggles.

耐用性方案~韌性

Model:

12SBDRB1836
Deformation of Bridge Test

設備將測試眼鏡架的抗變形能力

The device is to test the resistance to deformation of the bridge frame

LEMA TRS

Model:

LEMA TRS Steel Wool abrasion

設備通過使用鋼絲棉來測試耐磨性。

The device is used to test the resistance to abrasion by using steel wool.

LEMA UV燈箱

Model:

LEMA UV LAMP

設備用於激活光敏透鏡的設備。

The device is used to activate photocromic lenses.

耐用性方案~韌性

Model:

12SBMFR1800
Endurance Test

設備用於測試眼鏡架的多重折疊阻力

The device is to test the multiple folding resistance of the glasses frame

LEMA Xenon-Suntest

Model:

LEMA Xenon-Suntest

設備用於將太陽鏡片樣品暴露在輻射下，以確定其抗褪色性。

The device is used to expose sunglass lens samples to irradiation to determine their resistance to fading.

鏡片輪廓質量控制儀

Model:

Smart_Shape

設備用於自動檢查鏡頭的形狀。

The unit is automatically to check the shape of the lens.

PA1偏光軸測試儀

Model:

LEMA PA1 Polarized Axis Tester

設備通過全景調整手動確定太陽鏡的偏振軸。

The device is used to manually determine the axis of polarization on sunglasses with pantoscopic adjustment.

偏光片軸線角度
測試儀

Model:

GET.AXIS

設備通過頭部形式自動確定偏光單鏡片和成品太陽鏡的偏光軸。

The device is used to automatically determine the axis of polarization on polarizing single lens & finished sunglasses by using head-form.

燃燒測試

Model:

12SBRIG1112S
Ignition Test (without hood)

設備用於測試眼鏡架耐燃性

The device is to test the resistance to to ignition

全自動熱壓成型(CVP50)

Model:

LEMA CVP50 Automatic thermoforming machine

CVP50機台專為彎曲聚碳酸酯安全帽遮陽板而設。

CVP50 is a machine for bending polycarbonate helmet visors.

全自動熱壓成型(CPL32)

Model:

LEMA CPL32 Automatic thermoforming machine

CPL32是一款簡單且通用的機台，可用於塑膠材料（例如TAC極化，聚碳酸酯和扁平透鏡）的熱形式鏡片。它可以串聯彎曲鏡頭並保持高球體精度。

CPL32 is a simple and versatile unit to thermoform lenses in plastic materials such as TAC polarized, polycarbonate and lenses obtained by flat sheets.

倔亮度及散光度測試

Model:

12SBLVRP12311
Local Variation

設備用於測試太陽眼鏡的折射率和位移

The device is used for automatic and contemporaneous measurement of optical refractive properties.

球光度及散光度測試

Model:

12SBOBP1046/PLUS/CAM
Optical Bench (With Cam SP,AP+Prism) ISO12312-1

設備通過望遠鏡方法測試倔光度和散光度

The device is used for testing the refractive and astigmatic powers by using telescope method. Brand new technology testing method adopts camera to reduce result difference, and reflective system to reduce using space.

防霧測試(標準)

Model:

Anti-Fog Test Standard

設備用於測試抗霧性

The device is used to test the resistance to fogging

美標清晰度、球光度及散光度測試

Model:

12SBRPT1076
Resolving Power (Camera version with SP,AP Calculatoin)

設備通過望遠鏡測試鏡片質量

The device is used to test the lens quality by using telescope method. This device can also test the spherical and astigmatic power according to ANSI Z87.1 requirement.

自動透射分光測色儀 – 色差儀

Model:

Easy_Spectro_RX

設備用於測定鏡片或眼鏡成品的光透射率，和顏色分析

The device is a Spectrophotometer for Transmittance & Color Check and is IDEAL for Quality Control of Colored Glass, Plastic Film & other Translucent Materials in any industrial and labs environment.

品檢專用高彎眼形讀數機

Model:

LT-1200QA TRACER
Eyeshape & Dimension Control Test

設備用於讀取眼鏡架眼形數據。

The device is used for tracing the dimension of the frame size. A, B, C, DBL, ED, EDA, LD, LDA…etc.

球光度及散光度測試

Model:

Smart_OptiBench_Pro

設備通過望遠鏡方法測試倔光度和散光度

廣闊擴散光測試

Model:

12SBHZM1524
Hazemeter

設備用於通過霧度法自動測試鏡片品質。

The device is used to automatically test the lens quality by using haze method.

高重量及穿透測試

Model:

12SBHPI1340
High Mass Impact & Penetration Tester

設備使用向下墜落的球體測試鏡片的硬度

The device is used for manual drop high mass and penetration test on filters.

耐用性方案~硬性

Model:

7SBHPG1200/R1
High Speed Cannon Test Equipment (Horizontal Version)

設備用於測試高達200m / s的鏡片和眼鏡的耐衝擊性。

The device is used to test the resistance to impact of the lens and eyewear up to 200m/s.

PA6偏光軸測試儀

Model:

LEMA PA6 Polarized Axis Tester

設備用於自動確定太陽鏡的偏振軸，並具有頭模和全景調整功能。

The PA6 is an advanced electronic device designed to verify the correct alignment of polarized lenses on sunglasses mounted on a headform.

PA3偏光軸測試儀

Model:

LEMA PA3 Polarized Axis Tester

設備用於自動確定太陽鏡的偏振軸。

The device is used to automatically determine the axis of polarization on sunglasses.

ISO18526-4人頭模 (非撞擊測試用)

Model:

ISO 18526-4 Headform (Non-impact)

根據ISO18526-4設計的非撞擊測試用標準頭模

Standard head-form for Non-Impact use designed according to ISO18526-4

金屬熔融測試

Model:

12SBMMC1108
Molten metal test equipment

設備用於測試鏡片抗黏附金屬熔融

The device is used for testing protection against molten metals

保護鏡角度範圍測試

Model:

12SBCVL1115
Field of Vision Tester (EN + ISO)

設備用於測試視野

The device is used for testing field of vision

刺激性氣體防護性能測試

Model:

12SBGCA 5656
Equipment for testing resistance to gas and fine particles

設備用於測試對大灰塵顆粒的防護

The device is used for testing protection against large dust particles

硬度測試計 (Bayer磨擦儀)

Model:

Bayer Abraser 6160

設備用於測試鏡片表面對沙子顆粒的防護

The device is used to test the lens surface damage by sands

擴散光測試 (Method C)

Model:

12SBLDM1060/B
AFN Light Diffusion (Simplified method / Method C)

設備通過擴散方法B檢查鏡片質量。

The device is used to check the lens quality by using diffusion method B.

落球測試(DB3)

Model:

LEMA DB3 Drop Ball Test

設備用於在過濾器上進行手動落球測試。

The device is used for manual drop ball test on filters.

應力測試儀

Model:

LEMA P1 Polariscope

設備是用於鋼化玻璃的應力測試儀。

The device is a stress tester for thermally tempered glasses.

LEMA TRM

Model:

LEMA TRM Auto Minimum Robustness

設備通過在鏡片樣品上施加100N的質量來測試靜態變形。

The device is used for testing static deformation, by applying a 100N mass on the lens sample.

LEMA ULT Photometer

Model:

LEMA ULT Photometer

設備可在400nm（UV），可見光範圍，950nm（紅外光）下測量透鏡的透射率。

The device is a simple photometer that measures the transmittance of lens at 400nm (UV), visible range, 950nm (Infrared Light).

LEMA VL2

Model:

LEMA VL2 Light Box for lens color difference

設備用於視覺檢查顏色和鏡片表面。

The device is used for visual inspection of color and lens surface.

LEMA VL4 LED

Model:

LEMA VL4 LED

設備用於目視檢查鏡片表面。

The device is used for visual inspection of lens surface.

耐用性方案~硬性

Model:

12SBMRT1110
Minimum Robustness of oculars test equipment

設備使用重物測試鏡片在受壓下會否出現爆裂及裂紋

The device is used to test the minimum robustness of filters

LED Light Box

Model:

LEMA P6 LED

設備是用於鋼化玻璃的應力測試儀。

The device is a stress tester for thermally tempered glasses.

鏡片反射率測試儀 (針對反射率及反射顏色)

Model:

Smart_Reflect

快速測試鏡片表面塗層的反射率及顏色色差。

To check the reflection properties according to ISO 12312-1 and the Color Differences.

輻照測試

Model:

11SB1160UVX1450
Solar Radiation (36 Samples)

設備用於測試鏡片對太陽輻射的抵抗力

The device is to test the resistance to solar radiation of lens

美標棱鏡度測試

Model:

ANSI Prism Bench

設備用於通過激光系統測試棱鏡功率。

The device is used to test the prismatic power by laser system.

全自動熱壓成型(P10)

Model:

LEMA P10 Automatic thermoforming machine

P10機台可適應不同類型的模具以折彎單片鏡片，推薦用於小型製作。

P10 automatic bending machine can fit different kinds of molds for bending single lenses, recommended for small productions.

LEMA VL1

Model:

LEMA VL1 Device for the visual inspection of lenses

設備用於目視檢查鏡片。

The device is used for visual inspection of lenses.

熱門搜尋:

Resistance to Fogging

,

Wide Angle Scatter Light

,

Easy_Tester_Pro Combo

,

Photochromic Lens Test

按標準篩選：

按標準篩選：

​太陽眼鏡

安全護目鏡

滑雪鏡

按產品篩選：

按品牌篩選：

​

​

鏡片防霧性能測試儀 (連鏡頭版)

Resistance to Fogging Test (Double System)

變色鏡片測試

Photochromic Lens Test

高速光譜儀

Spectrum Testing(Transmittance, signal light, UV)

透光率一致性

Uniformity of Transmittance Test

倔亮度及散光度測試

Refractive Power Test

工業分光光度計

Frame Color Checking

落球測試

Drop Ball Test (Lens and Frame)

耐用性方案~硬性

High Velocity Impact Test

ISO18526-4人頭模 (撞擊測試用)

ISO18526-4 Headform (Impact)

落砂測試

Sand Spray Test

擴散光測試

Light Diffusion Test

PA5偏光軸測試儀

Polarized Axis Tester for Complete Eyewear with Head-Form(Manaul)

PA2偏光軸測試儀

Polarized Axis Tester for Lens (Manual)

粉塵防護性能測試

Resistance to Large Dust Particles Test

線性研磨機

Linear Abraser

擴散光測試 (Method A)

Light Diffusion Method A

落球測試(DB2)

Drop Ball Test (Automatic Drop Ball for Lens)

落球測試(DB4)

Drop Ball Test

耐用性方案~韌性

Frame Deformation Test

LEMA TRS

Steel Wool abrasion Test for Lens

LEMA UV燈箱

UV LAMP Box

耐用性方案~韌性

Endurance Test

LEMA Xenon-Suntest

Resistance to Solar Radiation

鏡片輪廓質量控制儀

Lens Shape Checking

PA1偏光軸測試儀

Polarized Axis Tester for Complete Eyewear (Manaul)

偏光片軸線角度測試儀

Polarized Axis Test

燃燒測試

Resistance to ignition on oculars test equipment

全自動熱壓成型(CVP50)

Automatic thermoforming machine for polycarbonate masks

全自動熱壓成型(CPL32)

Automatic thermoforming machine for polycarbonate lenses and masks

倔亮度及散光度測試

Local Variation Test

球光度及散光度測試

Refractive Power Test

防霧測試(標準)

太陽眼鏡

Spectrum Testing
(Transmittance, signal light, UV)

Drop Ball Test
(Lens and Frame)

Drop Ball Test
(Automatic Drop Ball for Lens)

偏光片軸線角度
測試儀

Wide Angle Scattering Test
(Hazemeter)